As an indispensable energy equipment in modern industry and life, the safe and efficient operation of electric heating steam generator is very important to ensure the smooth progress of production and life. In order to ensure the long-term stable operation of the equipment and avoid potential safety hazards, the following describes a series of taboos in the installation and use of electric heating steam generators for reference and please strictly implement.
First, installation environment taboo
Moisture and heat protection: The electric heating steam generator is strictly prohibited to be installed in a humid and hot environment to prevent the equipment from overheating caused by moisture damage to the electrical components and poor heat dissipation. When installing the device, ensure that there is enough space for routine maintenance and heat dissipation. It is recommended that the device be installed at least 30 cm away from the wall. Ensure that the heat dissipation holes of the machine are unimpeded, and do not place heavy objects on the top cover.
Second, safety emission taboo
Safety valve and steam outlet layout: The steam boiler safety valve outlet, steam outlet and blowdown valve outlet should be set with special attention, strictly prohibited in the direction of the aisle or personnel may pass, in order to prevent high-temperature steam or hot water caused by scalding accidents. Sewage outfalls should be connected to safe and secure locations to ensure that discharges do not pose a threat to people or the environment.
Third, pressure control taboo
Steam boiler steam pressure management: different furnace types of electric heating steam generators have different rated pressure, the user must strictly abide by the provisions of the equipment, may not arbitrarily increase the steam control rated pressure. At the same time, it is strictly prohibited to adjust or replace key components such as safety control insurance at will to ensure the stable operation of the equipment within the set safety parameters.
Fourth, water quality requirements taboo
Water purification and replenishment: In order to improve the service life of the steam generator, it is recommended to use purified soft water as the working medium, dirty sewage is prohibited, well water and groundwater are not recommended. The water tank needs to maintain sufficient water level, and the pump is strictly prohibited from idling in the state of no water to prevent the pump motor from being damaged due to overheating. Check water quality regularly to ensure water quality meets equipment requirements.
Finally,Voltage stability taboo
Voltage monitoring and protection: In the case of large or unstable power supply voltage fluctuations, the use of electric boilers should be suspended to avoid damage to electrical components due to abnormal voltage. When the supply voltage is lower than the rated voltage of the equipment, the suction of the relay and AC contactor will be weakened, which may cause continuous pulsation and accelerate damage. At this time, the machine should be shut down immediately, and the power should be turned on again after the voltage returns to normal to ensure the safe operation of the equipment
Following the above taboos in the installation and use of electric boilers is the key to ensuring equipment safety, extending service life and improving work efficiency. Users should strictly follow the requirements of the operation manual and this guide, regularly maintain the equipment, timely discover and eliminate potential safety hazards, and jointly create a safe and efficient production and living environment.
