The steam generator iron and board is a tool for levelling clothes and fabrics, the power is usually between 300-1000W. Its types can be divided into: ordinary type, thermostat type, steam spray type and so on. Ordinary type iron is simple in structure, cheap in price, easy to manufacture and maintain. Temperature regulating type iron can automatically adjust the temperature within the range of 60-250 ℃, can automatically cut off the power supply, can be used according to different materials to ironing temperature, than the ordinary type to save electricity. steam generator iron and board both temperature regulating function, but also can produce steam, and some are also fitted with a spray device, eliminating the need for manual water spraying trouble, and the clothes to spray water. Some of them are also equipped with spraying device, eliminating the trouble of manual spraying, and the wetting of the clothes is more uniform, and the ironing effect is better.
The power cord of ironing boards for steam generator irons must be a three-core braided cord. The green and yellow wire (or black wire) is the earth wire, the red wire is for the fire wire and the white wire is for the zero wire. The socket used must also be three-hole and reliably grounded. Self-supply power cord, the length of 2m is appropriate. If too long, and poorly arranged, so that the power cord dragged on the ground, walking people may trip over the iron, fall to the ground or burn the ironing in the clothing, and even injuries. In the steam ironing clothes in between, the iron should be placed in an upright position, or placed on a special iron shelf. Do not place the iron on flammable items to avoid catching fire; also do not place the iron on iron or masonry to avoid scratching the ironing board plating layer.
To remove the dirt on the outer surface of ironing boards for steam generator irons in time. The fluff on the surface of chemical fibre fabrics is easy to be melted and adhered to the bottom plate and coked, forming black spots, which is not only unsightly, but also brings inconvenience to the use. In order to avoid this kind of dirt, when ironing chemical fibre fabrics, you can pad a clean damp cloth. If the soleplate black spot, do not use a knife to scrape, that will destroy the soleplate cladding. The most convenient and effective method is: first use a wet cloth dipped in a little toothpaste, slowly wipe the rust spots, to be wiped clean, and then coated with a layer of wax, turn on the power supply, the wax will melt and then wipe. If the rust spot parts in the bottom surface of the iron, a piece of waste cloth can be used as a cushion, hard back and forth a few times. This method of removing dirt, not only will not damage the plating layer of the iron, and can make it restore the original smoothness and flatness. Steam iron after the use of the end (or in the middle of the power outage), should be unplugged, let it cool naturally, must wait for the hand touch no hot feeling, and then put into the box door.
The above introduction to the knowledge of steam iron has its own understanding. Steam iron can help us to solve the troubles on the clothes. Of course, the RELIABLE VACUUM IRONING BOARD can also be worth your consideration.
